Email this page

To view detailed information on this case's components, click on the hotspots on the case or the corresponding links below it.

The port on the left in this graphic is for connecting a 1/8" microphone tip.

The first RCA jack (white) from the left is for the left audio connection.

The middle RCA jack (red) is for the right audio connection.

The last RCA jack (yellow) is for a video connection. The port on the far right of this graphic is for S-video connections.

This is the power switch on the upper left corner of the DL-2 case front. The power switch button resides in the bezel and when pushed presses on the actual switch that is connect to the chassis. Light is passed from the LEDs mounted on the power switch panel through light pipes similar to those used on the desktop cases.

This port is for connecting USB devices to the front of the system.

The small hole to the left of the port is the reset switch for the system. Use a narrow stiff instrument (a straightened paper clip for example) to press the reset button.

Please note: If you have questions of a TECHNICAL nature or need TECHNICAL assistance, please contact technical support here as the Internet Editor address does not reach a Gateway support technician. Questions of a technical nature or requesting technical assistance cannot be responded to via the Internet Editor address.