In the Select a recovery option dialog box, select from Repair Applications and Drivers and Full System Restore, and then click Next.
View Picture

Repair Applications and Drivers

1. The process runs.
   View Picture

2. You are informed when the repair process is complete. To exit and restart the computer, click Quit.
   View Picture

Full System Restore

Note: If no partition is detected on the hard drive, this process starts at step 9.
1. If there is a partition on the hard drive, the Recovery Summary dialog box opens. If desired, you can click Customize to view settings and make manual restore selections, or to run the process using the existing settings, click Next. (Next = skip to step 8.)
   View Picture

2. If Customize was clicked in step 1, the Select your hard drive and Windows folder settings dialog box opens. Make any desired changes, and then click Next.
   View Picture

3. In the Select your identification settings dialog box, make any desired changes, and then click Next.
   View Picture

4. In the Select your network settings dialog box, make any desired changes, and then click Next.
   View Picture

5. In the Set your date and time settings dialog box, make any desired changes, and then click Next.
   View Picture

6. In the Install Gateway drivers and applications dialog box, you can clear the main check box so that no Gateway drivers and applications are installed, or make changes to the listed components. When desired changes are made, click Next.
   View Picture

7. You are returned to the Recovery Summary dialog box. Click Next.
   View Picture

8. In the Warning dialog box, click Yes.
   View Picture

9. The hard drive is partitioned.
   View Picture

10. At the Insert CD dialog box, replace the Server Companion CD (SCCD) in the optical drive with the operating system CD. The process continues automatically.
    View Picture

11. Files copy.
    View Picture

12. At the Insert CD dialog box, place the SCCD back in the drive.
    View Picture

13. The computer restarts, and then the Windows installation runs.
    View Picture

14. The computer restarts, and then files copy.
    View Picture

15. Windows installation continues.
    View Picture

16. After the Windows installation completes, the Gateway Application Loader copies files, and then installs all of the Gateway drivers and applications.
    View Picture
    View Picture

17. The computer may restart several times as the Gateway Application Loader runs. When complete, click OK.
    View Picture

18. Restore is complete.