Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I replace the hard disk drive cage in a St. Francis or St. Francis E Mid-tower case?

A: To remove the hard disk drive cage, perform the following steps:
  1. Remove the side service panel.

  2. Remove the front bezel.

  3. Remove the three screws to remove the hard disk drive cage.
    Remove the three screws to remove hard disk cage

  4. Remove the screw from the front of the case.
    Remove screw at the front of the case

Note: When reinstalling the hard disk drive cage, verify that the tab is inserted at an angle through the bottom of the hard disk drive cage.