Frequently Asked Questions Q: How do I disable the PXE Boot ROM on the 995 server? A: To disable the PXE Boot ROM, you must start the server into the BIOS Setup utility by pressing the F2 key during POST. After you are in the BIOS, select the Advanced menu, and then press the DOWN ARROW key until you find PCI Configuration. Press the ENTER key. In the PCI Configuration menu, select Embedded NIC 1 (1o/100), and then press ENTER. In the Embedded NIC 1 (10/100) properties page, press the DOWN ARROW key to Option ROM Scan, and then press ENTER to select to Disable the scan. Repeat the previous steps for Embedded NIC 2 (Gbit) to completely disable the PXE Boot ROM during POST.