Specifications
Part Number: 6003005RIntel Dual Port PCIe (x4) GbE Ethernet Adapter

Following are the specifications for the Intel® dual port PCI Express® (×4) GbE Ethernet adapter card.

Feature Specification
Controller-Processor Intel 82571EB
Connectors Two RJ-45
Data Rates Supported per Port 10, 100, and 1000 Mbps
Bus Type PCI Express 1.0a
Bus Width ×4 lane PCI Express, operable in ×4, ×8, ×16 slots
Bus Speed (×4, Encoded Rate) 10 Gbps uni-directional
20 Gbps bi-directional
EEPROM-SPI and Single EEPROM Support Yes
Interrupt Levels INTA
IEEE Support 802.3ab
Typical Power Consumption 4.95 W (3.3 V at 1.5 A)
Operating Temperature 0–55° C
LEDs 4 (1 link and 1 speed per port) solid and blinking
IEEE Standards/Network Topology 10BASE-T, 100BASE-TX, 1000BASE-T
Wiring Category-5, unshielded twisted pair (UTP), 4-pair
Adapter Product Features
  • Intel PROSet Utility and Intel PRO Intelligent Install for easy installation
  • Intel lead-free technology
  • Plug and play specification support (standard)
  • Auto-negotiation, full-duplex capable
  • Integrated media access control (MAC) and physical layer (PHY)
  • Includes a full-height bracket
  • Cable distance 100 m in Category-5 for 100/1000 Mbps; and Category-3 for 10 Mbps
  • Network Management
  • Wired for Management (WfM) baseline v2.0 enabled for servers
  • DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support
  • Remote Installation Services (RIS)
  • Diagnostics (loopback, testability, PHY register access)
  • Advanced configuration and power interface (ACPI) 1.0 power management
  • Wake on LAN support over PCI Express
  • PXE 2.0 enabled through boot read-only memory (ROM)
  • Advanced Software Features
  • Adapter fault tolerance (AFT)
  • Switch fault tolerance (SFT)
  • Adaptive load balancing (ALB)
  • Fast EtherChannel™ (FEC) (Available only when used with a capable switch)
  • Gigabit EtherChannel™ (GEC) (Available only when used with a capable switch)
  • Teaming support - Scales up to 8 connections
  • Multiple teams - Supports 4 separate teams, maximum
  • IEEE 802.3ad™ (link aggregation control protocol) (Available only when used with a capable switch)
  • Test switch configuration - Tested with major switch original equipment manufacturers (OEMs)
  • PCIe Hot Plug/Active peripheral component interconnect (PCI)
  • IEEE 802.1Q VLANs
  • IEEE 802.3 (z, ab, u, x) flow control support
  • TCP checksum offload — transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
  • IEEE 802.1p
  • TCP segmentation/large send offload
  • Interrupt moderation
  • Dimensions (L × W × H) 12.95 × 2.16 × 12.0 cm (5.1 × 0.85 × 4.725 inches)
    Hardware Certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC