| Gateway® 9315 Server Motherboard Specifications |
| Processor |
Dual socket 604 package
800 MHz front side bus (FSB)
Supports up to two Intel® Xeon™ CPUs (2.8 GHz minimum) |
| Chipset |
Intel E7320
- 800 MHz FSB
- Intel E7320MCH memory controller (Northbridge)
- Intel 6300ESB ICH I/O controller (Southbridge)
|
| Memory |
Six DIMM slots support from 256 MB to 12 GB (using DDR-333 or DDR-266 DIMMs) total memory
Use only DDR-266 or DDR-333 compliant, x72 ECC, registered, 184-pin, low profile (LP) SDRAM modules
Memory sparing (optional) |
| PCI Device/Slot |
PCI riser assembly, featuring:
- One full-length, full-height 64-bit PCI riser (PCI, PCI-X, or PCI-Express)
- One low-profile 64-bit PCI-X riser (up to 66 MHz)
|
| VGA |
On-board ATI Rage XL
- 8 MB SDRAM
- Up to 1600 × 1200 (2D)
- Up to 1024 × 768 (3D)
|
| LAN |
Integrated 10/100/1000 (Gigabit) network interface
Intel 82546EB and Marvell 88E8050 controller
IEEE 850.3u auto negotiation support
Full duplex support |
| Hard Drive |
Ultra ATA/100 support (one connector, two channels)
Up to three SATA fixed drives (RAID level 0 or 1 supported)
Up to three optional SATA hot-swap drives (RAID level 0 or 1 supported)
Note: The server chassis in which this motherboard is used only supports the standard one drive configuration and up to two optional drives. Only two SATA drives are configurable without the addition of an add-in SATA controller. The motherboard has two SATA connectors. |
| ACPI |
ACPI compliance
Supports:
|
| Ports |
PS/2 keyboard port
PS/2 mouse port
Two USB 2.0 ports
One RJ-45 serial port
One VGA Port
Two RJ-45 LAN ports |
United States
(change country or region)