Intel 82550PM Ethernet Controller Driver Installation
Part number 3501655,4000847,850912

  1. Obtain the network card drivers from the download section of the Gateway Web site or from the Server Companion CD (SCCD), and then save the drivers to a floppy disk.

  2. On the desktop, right-click My Computer. From the drop-down menu, select Properties. In the Properties dialog box, click the Hardware tab. On the Hardware tab, click Device Manager. In Device Manager, double-click one of the entries for Ethernet Controller.
    View Picture

  3. In the Ethernet Controller Properties dialog box, click the Driver tab. On the Driver tab, click Update Driver.
    View Picture

  4. In the Upgrade Device Drive Wizard dialog box, click Next.
    View Picture

  5. In the next dialog box, select Search for a suitable driver for my device (recommended), and then click Next.
    View Picture

  6. In the next dialog box, select Floppy Disk Drives, and then click to clear the check marks from the other selection boxes. Place the disk with the network card drivers into the floppy disk drive, and then click Next.
    View Picture

  7. The driver is located on the floppy disk. Click Next.
    View Picture

  8. The driver is installed. Click Finish.
    View Picture

  9. The Update Device Driver Wizard closes. You are returned to the properties page for the Ethernet Controller. Click Close.

Device Manager Recognition