Frequently Asked Questions

Q: How is the LCD Panel Removed?

A:

  1. Power down the system and unplug both power supply cords.
  2. Open the system.
  3. Remove the Bezel Assembly.
  4. Remove the four screw securing the LCD Panel Assembly to the Bezel Assembly.

    5. Item No.Part NumberDescriptionQty
    45BEZEL, Right1
    46BEZEL, Left1
    47SCREW, M3 x 8mm Phillips head truss, self-tapping4
    51CABLE, Ground1
    52SCREW, M3 x 8mm, Phillips head truss, self-tapping4
    53CLIP, Ferrite Split Ribbon2
    54FERRITE, Split, Ribbon (set of 2 secured by Item 53)1
    55CABLE ASSEMBLY, CCFL, LCD Panel (Male) - Route cable from LCD Display Assembly (Item 56) through chassis to LCD Front Panel Controller PCB (Item 67) and connect to CCFL, Controller Drive (Female), Item 65REF
    56DISPLAY, LCD ASSEMBLY1
    57CABLE ASSEMBLY, Signal - Route cable from LCD Display Assembly (Item 56) through chassis to LCD Front Panel Controller PCB (Item 67, JP9)1
    58DISPLAY RIBBON CABLE - Route from LCD Display Assembly (Item 56) through chassis to LCD Front Panel Controller PCB (Item 67, JP5)1
    59SCREW, M3 x 8mm Phillips head truss, self-tapping2
    60CABLE, Ground1
    61CABLE ASSEMBLY, System Reset - Route cable from Front Bezel, through chassis, to Front Panel Controller (Item 67, JP7)1
    62CABLE ASSEMBLY, Keyboard Inhibit - Route cable from Front Bezel, through chassis, to Front Panel Controller (Item 67, JP6)1