Specifications
      Show Part Numbers

Following are the specifications for the LSI MegaRAID 150-6 SATA PCI-X RAID controller.

Feature Specification
Internal Connectors Six 7-pin Serial ATA
Processor Intel GC80302
Device Support Up to 6 devices
Data Transfer Rates Up to 150MB/sec per drive
Cache Memory 64MB ECC SDRAM
Bus Type 64-bit/66MHz PCI
Physical Dimensions 6.875 x 4.2 inches (174.63 x 106.68mm)
Operating Temperature 0°C to 45°C (w/o BBU), 0°C to 40°C (w/ BBU)
Operating Voltage 5.00 V ± 0.25 V
Regulatory Certification CE, FCC, C-tick, ETL, VCCI, BSMI, and RRL
RAID Features
  • RAID levels 0, 1, 5, 10, and 50
  • Online RAID level migration
  • Online capacity expansion
  • Variable Stripe Size
  • Fast initialization for quick array setup
  • Auto resume on array reconstruction
  • 40 logical drive support
  • Background initialization for array consistency check
    		•
    Fault Tolerance Features
  • Configuration On Disk (COD) / NVRAM
  • Online RAID level migration
  • Online capacity expansion
  • Automatic rebuild of hot spare drives
  • Auto detection of failed drives
  • Hot swap of new drives
  • S.M.A.R.T. support
  • Backplane support
  • SAF-TE enclosure management
    		•
    RAID Management
  • Online Utilities:
    • Power Console Plus (GUI-based)
    • MegaManager (character-based)
  • Pre-Boot BIOS Utilities:
    • Ctrl. M (command line)
    • Ctrl. H (browser-based)
    • Gateway® Supported Operating System Microsoft® Windows® Server 2003