Specifications
Part Number: 6008032REmulex LPe111 4-GB PCIe x4 Fibre Channel HBA Card

Following are the specifications for the Emulex® LPe111 4-GB PCIe ×4 fibre channel HBA card.
Specifications are subject to change without notice or obligation.

Feature Specification
Standards
  • ANSI Fibre Channel:
    • FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4,
    • FC-FLA, FC-PLDA, FC-TAPE, FCP-2
    • Fibre Channel class 2 and 3
    • PHP hot plug-hot swap
  • PCI Express base spec 1.0a
  • PCI Express card electromechanical spec 1.0a
    		•
    Architecture
  • Single-channel
  • Up to 16 total port logins available
  • 4 Gb/s, 2 Gb/s or 1 Gb/s fibre channel link speeds automatically detected
    		•
    Hardware Environments x86 and x64 processor families
    Optical Characteristics
  • Data rates: 1.0625, 2.125 and 4.25 Gb/s auto-detected
  • Optics: Short wave lasers with LC type connector
  • Cable:
    • 50/125 µm, up to 300 meters at 2 Gb/s; 150 meters at 4 Gb/s
    • 62.5/125 µm, up to 150 meters at 2 Gb/s; 70 meters at 4 Gb/s
    • Voltage Requirement +3.3 volts
    Temperature
  • Operating: 32° to 131° F (0° to 55° C)
  • Storage: -40° to 158° F (-40° to 70° C)
    		•
    Airflow Required Natural convection
    Relative Humidity 5% to 95% non-condensing
    Agency Approvals
  • Class 1 Laser Product per DHHS 21CFR (J) and EN60825
  • UL recognized to UL 60950-1
  • CUR recognized to CSA22.2, No. 60950-1-03
  • TUV certified to EN60950
  • FCC rules, Part 15, Class B
  • ICES-003, Class B
  • EMC Directive 2004/108/EEC (CE Mark)
    • EN55022, Class B
    • EN55024
  • Australian EMC Framework (C-Tick Mark)
    • AS/NZS CISPR22, Class B
  • VCCI, Class B
  • MIC (Korea), Class B
  • BSMI (Taiwan), Class B
    		•