Optional LCP
      Show Part Numbers

Optional LCP This is the front of the Gateway® 9415 server with the optional local control panel (LCP) installed.

Item Description
A Standard power supply
B Slim-line optical drive
C Hard drive bays
D Optional LCP
Closer view of the LCP This is a closer view of the LCP. The LPC provides an intelligent front panel for the server, which lets you configure the server, monitor system status, and control the server from the panel. The LCD panel has its own microcontroller and is independent of the operating system. Its 4 × 20 display provides information directly from the Baseboard Management Controller (BMC) using the IPMB bus.

Refer to the following table for more information about the LCP.

Item Name LED Function LED Color LED Description
A USB 2.0 ports
B Reset button
C Hard drive activity LED Visible drive activity indicator Green Blinking = Drive active
D LAN 1 activity LED Visible LAN activity indicator Green
  • On = Connection established
  • Blinking = Activity
    		•
    E LAN 2 activity LED Visible LAN activity indicator Green
  • On = Connection established
  • Blinking = Activity
    		•
    F System status/fault LED Visible fault warning Green or Orange
  • On = No fault
  • Green blink = Degraded
  • Orange = Critical error or non-recoverable
  • Orange blink = Non critical
    		•
    G Power button
    H Power/sleep LED Identify the power state of the system Green
  • Off = Power is off (or S5)
  • On = Power is on (or S0)
  • Slow blink = Low power state (S1-S3)
    		•
    I System ID LED Aid in server identification from the front panel Blue On = Server identification enabled
    J Menu scroll right button
    K Menu scroll left button
    L Menu scroll down button
    M Menu scroll up button