 |
These are the six hot-swap drive bays on the front of the server. The server supports up to six SATA or SCSI (depending on the option selected) 1-inch high, 3.5-inch hot-swap hard drives. In addition, if SCSI is selected, the server can support up to four more SCSI 1-inch high, 3.5-inch hot-swap hard drives in the optional drive cage. The optional drive cage is installed above the standard six bays.
- SCSI drives: When the computer case is used in a tower configuration as shown in this graphic, the SCSI IDs 0 to 5 are arranged from left to right. In a rack mount configuration, the SCSI IDs 0 to 5 are arranged from the top to the bottom.
- SATA drives: When the computer case is used in a tower configuration as shown in this graphic, the drive IDs 0 to 5 are arranged from right to left. In a rack mount configuration, the drive IDs 0 to 5 are arranged from the bottom to the top.
How do I remove and replace a hot-swap hard drive in the 9510 Server? |
United States
(change country or region)