Specifications
Part number 3501746

Component 9115 1U Rack Mount Server Chassis
Processor Intel® Pentium® 4 processors with a system bus of up to 800 MHz and featuring Hyper-Threading Technology
System memory
Memory capacity Four DIMM sockets for up to 4 GB of unbuffered ECC DDR PC2100/PC2700/PC3200 memory
Memory type Unbuffered ECC or Non-ECC DDR PC2100/PC2700/PC3200 SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM sizes 128 MB, 256 MB, 512 MB, or 1 GB
Memory voltage 2.5V only
Error detection Corrects single-bit errors, detects double-bit errors (using ECC memory)
Integrated on-board
Chipset Intel® E7210 chipset
Dual network connections One Intel® PRO/1000 Server Network Connection (Intel® 82547EI Controller) and one Intel® PRO/100+ Server Network Connection (Intel® 82551QM Controller)
Graphics ATI RAGE XL SVGA PCI video controller with 8 MB of video memory
Super I/O controller Winbond W83627HF Super I/O controller
Input/output
Communication Streaming Architecture (CSA) port CSA port providing a dedicated link to the Intel PRO/1000 XT Server Network Connection for rapid network communication
PCI-X One 64-bit/66MHz PCI-X slot
Serial ATA Two ports supporting RAID levels 0 and 1
IDE Two EIDE channels for a total of four IDE devices
USB Three stacked USB connectors for a total of three at the rear panel, one internal front-panel USB header to provide one USB port
Serial ports Two serial ports: one asynchronous 9-pin RS-232C, one via 10-pin internal header
Floppy controller 1.44 MB and 2.88 MB, 3-mode support
Keyboard/mouse PS/2, 8240A-compatible
Management solutions
Hardware Mini BMC (National PC87431MAT or equivalent), and Heceta (ADM 1027) management controller
Software Gateway System Manager 3.1
Remote management LAN access to system status, logs, configuration data, and utilities, without the need for a remote-management card
Server monitoring To monitor temperatures, voltages, and fans
Server troubleshooting Event filtering and proactive alerting via LAN
Jumpers and front-panel connectors
Jumpers BIOS configuration
Front-panel connectors SSI-compliant connector with power LED, NIC activity LEDs, power on/off switch, reset switch
Mechanical
Server board style ATX
Server board size 12 inches × 9.6 inches
1U platform size 1.7 inches H × 16.9 inches W × 23 inches D
Power requirements
Power supply ATX 12V or EPS 12V capable
+5V 20.0A maximum continuous current
+5V Standby 2.0A minimum continuous current
+12V 18.0A maximum continuous current
+3.3V 24.0A maximum continuous current
-5V 0.00A maximum continuous current
-12V 0.5A maximum continuous current
Environment
Ambient temperature Operating (system): 10°C to 35°C
Non-operating/storage (system): -40°C to +70°C
Relative humidity Non-operating: 95%, non-condensing at 30°C