Frequently Asked Questions
What do the Fan Fault LEDs indicate?
Can I divide my server's SCSI hotswap backplane into more than one SCSI channel?
Can I change the SCSI IDs on my server's backplane?
Are there preventative maintenance steps to take with a HostRAID array?
Can I change the channel assignment of the 955 or 975 onboard SCSI controller?
What is the difference between 68-pin and 80-pin SCSI drives and what kind does my server support?
What is the largest size SCSI hard drive I can use in my server?
What steps can be taken if a SATA, SCSI or RAID adapter BIOS does not respond during startup?
What is the blue light (LED) on the server for?
Does this server support hotplug PCI?
Can I monitor the sensors in real time (temperature, voltage, and so forth)?
Where are the FCC, COA and Serial numbers placed on the Gateway 955 server?
Will this newer SCSI hard drive work in my older Gateway server?
Can I cluster the internal hard drives in my server?
Which SCA-2 HDD bay is which SCSI ID?
How do I clear the System Event Log on the 955 or 975 server?
Can I use all three bays for SCSI SCA hard drives in the 955 server?
How can I create a RAID 5 array with a 955 Server?
How do I rebuild a failed drive in a HostRAID array?
How do I disable the IDE controller on the Gateway 955/975 server motherboard?
In what order do I update the BIOS and firmware on the 955/975 servers?
What is the minimum or maximum amount of memory this server supports?
Can I mix memory in this server?
What are the different IDE/ATA standards, and which does my server support?
What is the fastest CPU that can be installed in this motherboard?
Which network port on the back of the server is number 1 (adapter 0) and number 2 (adapter 1)?
Which SCSI channel is assigned to the internal and external SCSI connectors on the 955 or 975 server?
My 955-series or 975-series server has no POST or video. Are there some steps I can take to find out what is wrong?
What is a BMC?
What amount of time drift is considered normal on the 955, 975 and 995 series servers?
Can I disable the integrated NIC ports?
Where is the serial port on the back of this server?
What is the System Setup Utility (SSU) and how do I use it?
My 955/975 server has no video. How can I troubleshoot this?