Rear View
9715 Server      Show Part Numbers

This is the rear of the Gateway® 9715 Server. In the following table, click the hyperlinks for more information.

Item Description
A PCI slots. From left to right they are:
  • Slot 1: PCI Express™ ×8 (hot plug)
  • Slot 2: PCI-X™ 133 MHz, 64-bit (hot plug)
  • Slot 3: PCI Express ×4 (hot plug)
  • Slot 4: PCI Express ×4 (hot plug)
  • Slot 5: PCI Express ×4 (hot plug)
  • Slot 6: PCI-X 100 MHz, 64-bit (not hot plug)
  • Slot 7: PCI-X 100 MHz, 64-bit (not hot plug)

To the right of slot 7 in this graphic is the external 68-pin Ultra320 SCSI VHDCI port.
B Optional Fiber Channel Module slot
C Serial port connector
D VGA monitor connector

Note: It can take up to five minutes for video to appear after the server is turned on.
E Power supply module
If only one power supply is used in the server it is installed in this bay.
F AC input power connector
G Power supply status LEDs
H AC input power connector
I Power supply status LEDs
J Power supply module
If only one power supply is used in the server it is installed in the other bay. A power bay fan module is then installed here.
K Two USB 2.0 ports
L LAN 1 port
M LAN 2 port
N System ID button
O System ID LED (blue)
P Generic Communication Module (GCM) port. Dedicated RJ-45 connector (used with the IMM Advanced module)