PCI Adapter Slots
9715 Server      Show Part Numbers

These are the PCI adapter slots in the Gateway® 9715 Server. There are seven slots, on the 9715 server motherboard. The slots are separated by dividers.

From top to bottom in this graphic, they are:

  • Slot 7 - 64-bit PCI-X 100 MHz, 1.0 slot (not hot plug)
  • Slot 6 - 64-bit PCI-X 100 MHz, 1.0 slot (not hot plug)
  • Slot 5 - Hot plug PCI Express ×4 slot
  • Slot 4 - Hot plug PCI Express ×4 slot
  • Slot 3 - Hot plug PCI Express ×4 slot
  • Slot 2 - Hot plug 64-bit PCI-X 133 MHz, 1.0 slot
  • Slot 1 - Hot plug PCI Express ×8 slot

The slots are identified by numbers embossed on the rear of the case.

Note: The slots that have hot plug capability are indicated by green retention clips. The slots that are not hot plug capable are indicated by blue retention clips. White tabs on the slot dividers also indicate which slots are hot plug capable.

How do I remove and replace/install a PCI card?

This graphic shows the slots from another angle.