||If two power supplies are used in a redundant configuration, they are hot swappable.
Indicator LEDs on the power supplies indicate power and fault status of the module. The top LED lights orange to indicate a power supply fault. The bottom LED lights green to indicate power is on.
||Right side panel release lever
||Pull this lever up to release the right side panel. You must remove the shipping thumbscrew (C) first.
||Remove this screw before removing the right side panel. Replacing the screw is optional
||Attach a cable lock to this slot to secure the right side panel and so that the computer can be secured to a solid object.
||Certificate of Authenticity (COA) label plate
||This plate carries the COA label, which provides the product identification number for the Microsoft® Windows® operating system originally installed on the hard drive.
||Exhaust fan vent
||Warm air is exhausted through this vent. Do not block this or any other case vent.
||Add-in card retention door
||Secures add-in cards in the case. Open this door when replacing or adding cards.
||Thumbscrew for add-in card retention door
||Remove this screw to open the card retention door. This screw must be replaced to secure the door closed and cards in the slots.
||Provide connections for a variety of devices including but not limited to a keyboard, mouse, and monitor.
The actual number and type of ports depends on the motherboard installed in the computer.
||Add-in card slots
||This case provides five slots for add-in cards. The actual number of available slots depends on the motherboard installed in the computer.