Video - ATI Rage XL Video Driver Installation for the 7450R or 935 Series Servers in Windows NT 4.0 Server
Part number 3500914,3501070,3501082,3501125,3501230,4000719,4000749,4000756,4000780

  1. Insert the Server Companion CD (SCCD) into the CD-ROM drive. In the index home page window, click the 7450R button.
    View Picture

  2. In the left frame, click Windows NT.
    View Picture

  3. In the right frame, under Windows NT On-Board Drivers and Utilities, click ATI Rage XL Video (7510580).
    View Picture

  4. In the Save As dialog box, save the file to the root directory of drive C. The default file name appears in the File name text box. Click Save.
    View Picture

  5. Open Windows Explorer. In the left frame, click drive C. In the right frame, double-click the saved file.
    View Picture

  6. The path to where the file will be extracted is displayed in the ZipMagic Self-Extracting Archive dialog box. Click Next.
    View Picture

  7. Click Next.
    View Picture

  8. In the Destination Folder dialog box, click Yes.
    View Picture

  9. The files are extracted. Click Finish.
    View Picture

  10. Click Start, point to Settings, and then click Control Panel. In Control Panel, double-click the Display icon.
    View Picture

  11. In the Display Properties dialog box, click the Settings tab. On the Settings tab, click Display Type.
    View Picture

  12. In the Display Type dialog box, click Change.
    View Picture

  13. In the Change Display dialog box, click Have Disk.
    View Picture

  14. In the Install From Disk dialog box, in the Copy manufacturer's files from text box, type the path to where the drivers were extracted. The default path is C:\ati_nt. Click OK.
    View Picture

  15. In the Change Display dialog box, in the Display list, click Rage XL PCI (English), and then click OK.
    View Picture

  16. In the Third-party Drivers dialog box, click Yes.
    View Picture

  17. Files are copied to the hard disk. In the Installing Driver dialog box, click OK.
    View Picture

  18. In the Display Type dialog box, click Close.
    View Picture

  19. In the Display Properties dialog box, click Close.
    View Picture

  20. The driver could not be loaded dynamically. Windows NT must be restarted. In the System Settings Change dialog box, click Yes.
    View Picture

  21. In the Invalid Display Settings dialog box, click OK.
    View Picture

  22. In the Display Properties dialog box, click Test.
    View Picture

  23. In the Testing Mode dialog box, click OK.
    View Picture

  24. A test screen is displayed momentarily. When finished, the Testing Mode dialog box opens. Click Yes if the test screen was seen correctly.
    View Picture