Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the hard drive in the E-4350 computer?

A: Remove the hard drive

  1. Turn off the computer, and then disconnect the power cord.

  2. Remove the computer case left side panel.

  3. If desired for more stability, you can carefully lay the computer on its right side.

  4. Inside the case, locate the hard drive near the front of the case.
    View Picture

  5. At the rear of the hard drive to be removed, disconnect the power and data cables.

  6. Slide the hard drive release latch toward the outside of the case.
    View Picture

  7. Slide the hard drive out of the bay.
    View Picture

Replace the hard drive

  1. Slide the hard drive into the bay.

  2. Secure the hard drive in the bay by sliding the hard drive release latch toward the inside of the case.
    View Picture

  3. At the rear of the hard drive, connect the power and data cables.
    View Picture

  4. Replace the computer case left side panel.

  5. Connect the computer's power cord, and then turn on the computer.