Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the front fan in the 6-bay micro uBTX case?

A: Remove the front fan

  1. Turn off the computer, and then disconnect the power cord.

  2. Remove the right side panel.

  3. Remove the air duct.

  4. Remove the four screws that secure the fan in the air duct.
    View Picture

  5. Pull the fan out of the air duct.

Replace the front fan

  1. Position the air duct so that the wide end is facing you and the handle is to the right.

  2. Place the fan in the air duct so that the label on the fan faces inside the duct and the fan cable is near the upper left corner.
    View Picture

    Note: The fan must be installed in the air duct with its cable in the proper position. This ensures that the cable is long enough to reach the fan connector on the motherboard.

  3. Secure the fan in the air duct with four screws.
    View Picture

  4. Replace the air duct.

  5. Replace the right side panel.

  6. Connect the power cord, and then turn on the computer.