Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the power supply in the 6-bay micro uBTX case?

A: Remove the power supply

  1. Turn off the computer, and then disconnect the power cord.

  2. Remove the right side panel.

  3. Inside the case, the power supply is located at the upper rear corner.

  4. Follow the power leads from the power supply to their device or motherboard connections. Carefully note all locations, and then disconnect the power leads.

  5. At the rear of the computer case, remove the three screws that secure the power supply.
    View Picture

  6. Inside the case, pull the power supply toward the front of the case a short distance, and then remove it from the case.
    View Picture

Replace the power supply

  1. Align the power supply in the case, and then slide it to the rear of the case.

  2. At the rear of the case, secure the power supply with three screws.
    View Picture

  3. Inside the case, connect power leads to devices and the motherboard.

  4. Replace the right side panel.

  5. Connect the power cord, and then turn on the computer.