Installation instructions for the IBM Token-Ring
      Show Part Numbers

  1. On your screen, locate and click the Start button. From the Start menu, point to Settings, then click Control Panel. In Control Panel, double-click the Networks icon. Windows asks if networking should be installed. Click Yes.
    View Picture

  2. Windows NT will begin the setup initialization.
    View Picture

  3. Select Wired to the network, then click Next.
    View Picture

  4. The adapter will not be automatically detected, click Select from list to add the driver.
    View Picture

  5. Under Select network adapter, click Have disk.
    View Picture

  6. In the next dialog box, enter in the path for the NT drivers, then click OK.
    View Picture

  7. When the Select OEM option appears, select the IBM PCI Token-Ring and click OK.
    View Picture

  8. Select the proper adapter, then click Next.
    View Picture

  9. Select the protocols that will be used to connect to the network, then click Next.
    View Picture

  10. Select the Network services that will be used to properly connect to the network, then click Next.
    View Picture

  11. Windows NT is ready to install networking components, click Next to continue.
    View Picture

  12. Enter the proper path for the Windows NT 4.0 I386 directory, then click Continue.
    View Picture

  13. Setup prompts on whether to use DHCP, depending on whether you have an IP address, or connect to a DHCP server, choose Yes or No.
    View Picture

  14. Setup will copy the necessary files for the networking components.
    View Picture

  15. When copying is complete, choose the bindings for the network, then click Next.
    View Picture

  16. Windows NT will start the networking, click Next to start the network.
    View Picture

  17. Enter the computer name, workgroup, and domain to connect with. Click Next.
    View Picture

  18. Networking has been installed, click Finish to complete the installation.
    View Picture

  19. Setup will prompt for the computer to be shut down and restarted. Click Yes, the installation is complete.