Solo 9100 Specifications
      Show Part Numbers

System Solo 9100
Dimensions12.32" × 9.56" × 2.20"
Weight8 lbs 2 oz with hard drive, battery, CD-ROM, floppy disk
Operating Temperature5 to 35° C
Storage Temperature-25 to 60° C
Operating Humidity5 to 85% max. 26° C wet bulb
Storage Humidity15 to 98% RH no condensation
Operating Altitude8,000 feet
Non-Operating Altitude40,000 feet
Vibration (Operating)5 to 500 to 5Hz, 0.5G acceleration, 1 oct/min., 15 dwell at all resonance points
Vibration (Non-Operating)5 to 500 Hz, PSD 0.015G2 /Hz, 2.16 Grms, 200 to 500 Hz, -6db/Oct on 3 axis, 2 hours/axis
Shock (Operating)10G, ½ sine pulse, 11msec duration, three drops per bottom face by impact machine. (Similar impact with edge raised 70mm drops on to a desktop)
Shock (Non-Operating)60G, ½ sine pulse, 11msec duration, three drops per bottom face by impact machine. (Similar impact with edge raised 50cm drops on to a business floor)
Package Drops91cm drops on to a concrete floor, one drop per each faces, six faces, and bottom edges, four edges
ElectrostaticDestruction 15KV, no hard failure
Fault Movement ±10KV, no soft failure
Charge Capacitance100pF
Discharge Resistor1 Kohm
AC Line noise shall function without error or failure for 800V, 100 ns wit rise time less than 5ns at both polarity
Surge Immunityshall be no hard failure under the following conditions
AC 1.5kV (1 time)
or
Normal mode 6.0kV PEAK
Common mode 3.0kV PEAK
Safety RequirementsGermany TUV/EN60950
USA UL1950
Canada CSA22.2, no 950 CSA22.2, no 234 level 3
EMI RequirementsGermany VDE 243
USA FCC PART 15
Internation CISPR 22
MTBF15,000 power on hours
PCMCIA controller: Cirrus GD-6832 with Zoomed Video and 32-bit Cardbus support; on the PCI bus
Super I/O controller:National Semiconductor PC87C338VJG
Battery Life:3 hours 48 minutes or better
Charge Time:Li-Ion 12 cell: 2-2.5 hours with unit off; 3 hours with unit on
Internal Bridge Battery:Maintains memory in suspend mode for about 10 minutes when swapping batteries
Power Management:Suspend mode lasts for about 1 week: APM 1.2 with battery gauge; suspend or warning on low battery
AC Adapter:19VDC, 45 W Output; auto voltage adjustment between 100 and 240VAC
Hard Disk:Removable; accepts 2.5", 12.7 - 19mm hard disk drive; 1.0GB, 1.4GB, 2.0 GB, and 3.0 GB capacity at launch, larger capacities to be qualified.
Hard Disk controller:Two independent bus mastering Enhanced IDE channels, on PCI bus; support PIO IDE transfers up to 16.6 Mbytes/s and "Ultra DMA" Bus Master IDE transfers up to 33Mbytes/s

Information in this document was provided by the manufacturer.

For specific component specifications, select your notebook type from our Support Documents page, and then click Components. In the Component List for your specific system, click the part number you wish to view, and then click Specifications.