Solo 3350 Specifications
      Show Part Numbers

System Solo 3350
System
CPU module Intel CPU of uBGA2, low-voltage, with SpeedStep technology
Coppermine 400/500/600/700 MHz
Celeron 400/500 MHz
Core logic North bridge: 443ZXM
South bridge:PIIX4M
FSB clock 100 MHz
System memory One 144-pin industrial standard SODIMM socket
Up to 1.27 inches wide
100 MHz/PC 100
Support SDRAM to maximum 256 MB
Without on-board memory
BIOS 512-KB BB flash ROM and socket for BIOS development only
Phoenix NoteBIOS 4.0 release 6.0 code base
 
Video
Graphics ATI Mobility M
4-MB embedded video memory
Support ZV port
Display 12.1-inch or 5.5-mm (thickness maximum) TFT XGA LVDS interface
 
Expansion
Port replicator One 140-pin connector
Support one parallel, one CRT, one serial, one USB, one modem (including DAA), one LAN, one Mic in, one Line out, DC in, one media bay drive, and two PS/2 ports
Support warm docking
Media bay modules Support floppy disk drive and IDE interface
 
I/O
Ports One parallel port (25-pin D-shell connector, support SG. s floppy disk drive drive)
One PS/2 compatible mouse/keyboard ports (6-pin mini-DIM); one VGA external monitor port (15-pin D-shell connector)
One USB port (version 1.0)
One media bay connector
PCMCIA Ti 11410 CardBus controller
One type II PCMCIA 2.1 compliant socket
Supports CardBus
Supports ZV port
LAN One LAN port, RJ45 connector
3Com Tornado/3C920V1
10/100-BaseTX
PCI bus master Ethernet
Wake-on-LAN PC 98 support, including ACPI
Modem One modem port, RJ11 connector
ESS 1988 software modem solution
V.90 56 Kbps
Worldwide DAA support
Keyboard 84, 85, and 87 keys for US, Europe and Japan
Two separate Windows 95 application keys included
18-mm key spacing
2.5-mm travel, scissors technology
TouchPad Touch-sensitive control pad, two buttons
Kensington Lock Provides a mechanical lock for notebook security
 
Storage
Hard disk 9.5-mm Enhanced IDE interface
MCC specification compliance
Support PIO mode 4/Ultra DMA33 support (bus master)
Field upgradable and installed easily
 
Multimedia
PC audio ESS 1988 +AC97 codec
PCI audio, 3-D capability, ACPI 1.0 compliant
24 voices simultaneously wave table synthesizer
Volume level control by driver, H/W supports up to 64 steps
Support ZV port
One internal mono MIC
One internal speaker
One Microphone in port (mono telephone jack)
One Headphone port (stereo telephone jack)
 
Status indicators
LED indicators Power/suspend
Battery status (dual-color LED to indicate three functions)
Drive access (indicating hard disk or media bay module is accessing)
Caps lock
Numeric lock
Scroll lock
 
Power system
Intelligent charger When system is off, the battery charge time is 1.5 hours
When system is on, system supports dynamic charge current to charge battery
Battery pack 6-cell Li-Ion battery pack with 31.08 W (2,800 mAH) capacity
With four battery gauge indicators
Embedded controller BQ2040 to support smart battery
AC adapter Auto-sensing 90 to 264 VAC input (3-pin)
47 Hz to 63 Hz AC input frequency
19 VDC output voltage
2.64 A output current (50 W)
2-wire DC cord with 3-pin header for DC output
With LED
LCD inverter Adjustable backlight brightness control
Auto dimming function support when the AC adapter is not present (selectable in setup)
Thermal solution CPU, TDP 9.5 W
Fan and heat sink with heat pipe
Fan speed is controllable
 
Button/switch
Lid switch Turn off LCD and switch to CRT if connected or wake up the system from suspend mode if the LCD is opened (selectable in setup)
Reset button Reset whole system if system cannot recover by pressing power button
Power switch Power switch, power on/off, or suspend/resume switch (selectable in setup)

For specific component specifications, select your notebook type from our Support Documents page, and then click Components. In the Component List for your specific system, click the part number you wish to view, and then click Specifications.