Solo 2300 7x/11x CD-ROM drive installation

Note: The 7x/11x Teac and 8x/20x Teac CD-ROM drives use the same driver.

  1. To begin the installation, insert the Universal boot disk version 1.4, part number 7502103, into the 3.5-inch floppy disk drive and turn on the computer. The computer starts to the Main Menu. Select View Your Boot Disk Settings, then press the ENTER key.

  2. Confirm that Solo 2300 Teac INTERNAL CD-ROM is selected. Then hit any key to return to the Main Menu.

  3. Using the arrow keys, select Install CD-ROM Drivers On Your Hard Drive, then press ENTER.
    View Picture

  4. An information screen appears, press the F1 key to continue.
    View Picture

  5. The installation is complete. Press any key to return to the main menu.
    View Picture

  6. At the Main Menu, use the arrow keys to select Exit Program, Go Back To DOS.
    View Picture

Lines added to the Config.sys:

DEVICE=C:\CDROM\TEAC_CDI.SYS /D:CD1

Lines added to the Autoexec.bat:

C:\CDROM\MSCDEX.EXE /D:CD1 /L:D