Frequently Asked Questions
      Show Part Numbers

Q: How do I replace the hard drive in this notebook?

A: Warning: Disconnect the power adapter and the modem and network cables. Remove the battery before removing the hard drive bay cover. Replace the cover before restoring power or reconnecting the modem and network cables.

  1. Back up any data you want to transfer to the new hard drive.

  2. Before beginning, review electrostatic discharge (ESD) precautions.

  3. Shut down the computer, and then disconnect the power adapter.

  4. Disconnect the modem and network cables.

  5. Disconnect all peripheral devices and remove any PC cards.

  6. Disconnect your notebook from the optional port replicator.

  7. Turn the computer over, and then remove the battery.

    1. Slide the battery lock to the unlock position.
    2. Slide the battery release latch.
    3. Slide the battery out of the bay.

  8. Remove the hard drive kit screws.
    Highlighted view of hard drive kit screws.

  9. Slide the old hard drive kit away from the hard drive bay.
    Image of sliding the old hard drive kit away from the hard drive bay

  10. Lift the hard drive kit out of your notebook.
    Image of lifting the hard drive kit out of the computer

  11. If your new hard drive already includes the hard drive kit bracket, go to step 15. If you need to move the hard drive kit bracket from your old hard drive kit to your new hard drive, go to step 12.

  12. Remove the two screws on each side of the hard drive kit that secure the hard drive to the hard drive bracket.
    Hard drive kit image

  13. Remove the bracket from the old drive.

  14. Insert the new drive into the bracket so the screw holes line up, and then replace the two screws on each side, that secure the bracket to the drive.
    Hard drive kit image

  15. Slide the new hard drive kit back into the hard drive bay.
    Image of sliding the new hard drive kit back into the hard drive bay

  16. Replace the screws that secure the hard drive kit to the notebook.
    Closeup view of hard drive screws

  17. Insert the battery, and then turn over the computer.

  18. Reconnect the optional port replicator.

  19. Connect the AC adapter, modem and network cables, and then turn on the computer.