 |
 |

Frequently Asked Questions
Show Part Numbers Hide Part Numbers 1014153R, 2905937R, ViperC Q: How do I install or replace the main battery on the Gateway convertible notebook?A: Note:
Danger of explosion if battery is incorrectly replaced. Replace only with a battery specifically manufactured for your Gateway convertible notebook. Discard used
batteries according to local hazardous material regulations.
The battery used in this device may present a fire or chemical burn hazard if mishandled. Do not disassemble, heat above 212° F (100° C), or incinerate. Dispose of used battery promptly. Keep away from children.
To install the main battery:
- Close the LCD panel.
- Turn your convertible notebook over so the bottom is facing up.
- Hold the battery label-side down and lower it into the open battery bay until the battery clicks into place.
- Slide the battery lock to the locked position.
To replace the main battery:
- Disconnect your convertible notebook from the optional port replicator.
- If your convertible notebook is on and is connected to AC power or has a charged multi-bay battery installed, go to Step 3. If your convertible notebook is on, is not plugged into an AC outlet, and does not have a charged multi-bay battery installed, save your work and turn off the convertible notebook.
- Close the LCD panel.
- Turn your convertible notebook over so the bottom is facing up.
- Slide the battery lock to the unlocked position.
- Slide the battery release latch, and then slide the battery out of the bay.
- Slide a recharged battery into the bay until it snaps into place.
- Slide the battery lock to the locked position.
- Turn your convertible notebook over.
- Open the LCD panel and press the power button.
|
 |
 |