Introduction

Read this guide to learn how to install a replacement or new add-in card in your computer. An add-in card could be a:

Graphics card

Modem card

Network card

Sound card

Installing an add-in card is a process consisting of seven procedures that must be done in sequence:

1. Prepare for installation.

2. Remove existing software (modem or sound card)

3. Remove an existing card (if applicable).

4. Install the new card.

5. Install the card software.

6. Install any additional software (modem cards)

7. Customize your card (graphics cards)

This guide also has a troubleshooting section that provides installation troubleshooting tips.

Tips & Tricks

See the documentation that came with your computer for information about opening and closing your computer case. If you do not have printed documentation, go to the Gateway Web site (www.gateway.com) and print the appropriate document before starting the installation procedure.

Important

The illustrations in this document show a typical computer. They may not exactly match your configuration and may include options you did not purchase. However, they are similar enough to your computer that they should help you install the new card successfully.