Q - J18 Flash/PWD jumper settings
      Show Part Numbers

J18 Flash/PWD jumper settings

The 3-pin jumper block determines the BIOS Setup Utility's mode.

Note: Do not move any jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, damage to the motherboard can occur.
Function or Mode Pins Covered Configuration
Normal 1 and 2
Normal setting		 This setting is for normal operation.
Configure 2 and 3
Configure setting		 This setting is for clearing the password.
Recovery None
Recovery setting		 The BIOS attempts to recover the BIOS configuration.