Specifications
      Show Part Numbers

Following are the specifications for the Intel® (Midway) Pentium® 4 motherboard.
Specifications are subject to change without notice or obligation.

Feature Specification
Form Factor microATX - 9.60 × 9.60 inches (243.84 × 243.84 mm
Processor Support
  • Intel® Pentium® processor in an mPGA478 socket with a 400/533/800-Hz system bus
  • Intel Celeron™ processor in an mPGA478 socket with a 400-MHz system bus
  • Memory
  • Four 184-pin DDR SDRAM DIMM sockets
  • Support for DDR 400, DDR 333, and DDR 266
  • Support for up to 4 GB of system memory
  • Chipset Intel 865G Chipset, consisting of:
    • Intel 82865G GMCH
    • Intel 82801EB ICH5
    • 4-Mb FWH
    Video
  • Intel Extreme Graphics 2 controller
  • Universal 0.8 V / 1.5 V AGP 3.0 connector supporting 1X, 4X, and 8X AGP cards or an ADD card
  • Integrated retention mechanism
  • Audio AD1981B Integrated Digital Audio codec
    This chipset only supports analog speakers.
    I/O Control SMSC LPC47M172 LPC Bus I/O controller
    USB Support for USB 2.0 devices
    LBA Support for 48-bit Logical Block Addressing (LBA)
    Peripheral Interfaces
  • Eight USB ports
  • One serial port
  • One parallel port
  • Two serial ATA IDE interfaces
  • Two parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
  • One floppy disk drive interface
  • PS/2 keyboard and mouse ports
  • LAN Support 10/100 Mbps LAN subsystem using the Intel 82562EZ Platform LAN Connect (PLC) device
    BIOS
  • Intel/AMI BIOS (resident in the 4 Mb FWH)
  • Support for ACPI, Plug and Play, and SMBIOS
  • Instantly Available
    PC Technology
  • Support for PCI Local Bus Specification Revision 2.2
  • Suspend to RAM support
  • Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
  • Expansion Capabilities Three PCI bus add-in card connectors (SMBus routed to PCI bus connector 2)
    Hardware Monitor
    Subsystem
  • Hardware monitoring and fan control ASIC
  • Voltage sense to detect out of range power supply voltages
  • Thermal sense to detect out of range thermal values
  • Three fan connectors
  • Three fan sense inputs used to monitor fan activity
  • Fan speed control