 |
|
Y - Intel 82845G GMCH
Show Part Numbers
Hide Part Numbers
2518943, 2518944, 2518946, 2518947, 2518948, 2518949, 2518950, 2518951, 2518952, 2518953,
2518954, 2519058, 2519067, 2519074, 2519079, 2519084, 2519091, 2519101, 2519150, 2519366,
2519530, 2519567, 2519568, 2519569, 2519570, 2519571, 2519572, 2519573, 2519574, 2519575,
2519576, 2519577, 2519578, 2519579, 2519580, 2519581, 2519582, 2519583, 2519614, 2519940,
2520000, 2520534, 2520679, 2520681, 2520773
 |
This motherboard uses the Intel® 845G chipset. This chipset includes:
- Intel 82845G Graphics and Memory Controller Hub (GMCH)
- Intel 82801DB I/O Controller Hub (ICH4)
- Intel 82802AB BIOS Firmware Hub (FWH)
|
The Intel 82845G GMCH controls the following:
- Accelerated Graphics Port (AGP) Interface
- Full AGP 2.0 compliance
- Supports 1X, 2X, and 4X AGP cards, with 1.5 volt (V) only signaling
- Supports 2X and 4X fast write signaling
- Memory
- Two gold-plated 3.3 volt (V) un-buffered DDR DIMM slots
- Support for SDRAM at 4-clock, 200-megahertz (MHz) or 266-MHz (DDR 200, DDR 266)
- Support for 64-megabit, 128-megabit, 256-megabit, or 512-megabit memory technologies
- Single-sided or dual-sided un-buffered DDR DIMM configuration
- Suspend-to-RAM (ACPI S3) support
- Serial Presence Detect (SPD) 1.x or later
- Support for type CL2 and CL3 devices
|
|
|
United States
(change country or region)