 |
 |

Main View Part Number:
2515574Intel (El Paso 2) Motherboard - 2.0-GHz
On the graphic, click the links for more information. |
Motherboard features include:
- Intel® 82845 chipset. This chipset includes:
- Intel 82845 Memory Controller Hub (MCH)
- Intel 82801BA I/O Controller Hub (ICH2)
- Intel 82802AB BIOS Firmware Hub (FWH)
- Support for up to 1 gigabyte (GB) of memory using 200/266 MHz DDR SDRAM
- AGP connector supporting 1.5-volt (V) 4X AGP cards
- Ultra DMA, ATA-33/66/100 support
- 100-megahertz (MHz) front bus speed (speed of motherboard)
- 400-MHz host bus speed (speed at which the I/O controller hub communicates with the processor)
- Advanced Configuration and Power Interface (ACPI) support (Power Management support)
- PCI local bus specification revision 2.2
- Integrated Audio and 10/100 Ethernet
|
Note: If Quick Boot is enabled in the BIOS Setup utility, the monitor does not warm up soon enough to show the power-on self-test (POST) screen. Turn on the monitor, then the computer and press the F1 key immediately to enter the BIOS.
Note: When reseating any components or working inside the case, unplug the power cord and wait for the green light to turn off (10 seconds maximum). There is more available current supplied to this motherboard than others. Failure to unplug the power cord will cause shorts and hot spots on the motherboard and the component you were working with.
|
 |
 |