Specifications
      Show Part Numbers

Following are the specifications for the motherboard.
Specifications are subject to change without notice or obligation.

Feature Specification
BIOS AMI BIOS
Memory Support Three DIMM slots support the following:
  • 3.3 volt memory only
  • 64-bit (non-ECC) memory data bus
  • 4 clock, 100-megahertz (MHz) and 133-MHz unbuffered SDRAM
  • Single or double-sided DIMM configurations
  • 512 MB maximum memory using:
    • 16 MB, and 32 MB (16-megabit technology)
    • 32 MB, 64 MB, and 128 MB (64-megabit technology)
    • 64 MB, 128 MB, and 256 MB (128-megabit technology)
    • 128 MB, 256 MB, and 512 MB (256-megabit technology)
Processor Host Bus Speed
  • Intel® Pentium® III processor in a 370-pin PPGA socket with 100/133-MHz host bus speed
  • Intel Celeron™ processor in a 370-pin PPGA socket with 66/100-MHz host bus speed
    		•
    Chipset The Intel Solano 82815 chipset consisting of:
    • Intel 82815 GMCH
    • Intel 82815 ICH2
    • Intel 82815 FWH
    On-Board IDE
  • SMSC LPC47M102 LPC interface super I/O controller
  • UATA 33/66/100
    		•
    Integrated Video
  • Intel 82815 graphics controller
  • 16,777,216 colors maximum
  • 1,600 × 1,200 maximum resolution (dependent on the monitor)
  • Integrated Accelerated Graphics Port (AGP) 2X or 4X video
    		•
    Slots
  • Five 32-bit bus master PCI v2.2 slots
  • One communication network riser slot
  • Supports 3.3 to 5-V bus interface
    		•
    USB PortsTwo 1.1 compliant USB ports located on the rear panel connector stack.
    Remote Control
  • Meets ACPI specifications
  • Power switch connector on-board
  • Soft power off
    		•
    Environmental
  • Operating: 0 to 55° C (32 to 133° F)
  • Non-operating: –40 to 70° C (–40 to 158° F)

    Note: An ambient temperature that exceeds the board's maximum operating temperature by 5 to 10° C might cause components to exceed their maximum case temperature.

    		•
    Reliability MTBF is 293,919 hours at 55° C (133° F)