| Video |
| CRT | M68LMF256X 27V invar shadow mask type. Diagonal CRT size is 29 inches with a viewable size of 27 inches. The viewable size is what needs to be quoted. Neck size is 29.1 millimeters (mm). Diagonal deflection angle of 108 degrees. |
| Maximum resolution | 800 × 600 |
| Display colors | Unlimited |
| Horizontal stripe pitch | | screen center : 0.6mm | screen edge : .78mm | | Note: The variance between screen center and screen edge stripe pitch may make the monitor look comparatively fuzzy at the edge. This is not a defect. |
|
| Scanning frequency | Horizontal; 24 to 38 kilohertz (kHz); Vertical, 60 hertz (Hz) to 72 Hz |
| Aspect ratio | 4:3 |
| Input signal video sync | Analog: .07 Vp-p 75 Ohm; Separate synchronization: time to live (TTL) level; Horizontal synchronization: positive or negative; Vertical synchronization: positive or negative |
| Power input | 90–264 volts alternating current (VAC), 50 to 60 hertz (Hz) ± 3 Hz |
| Power management | Meets Energy Star requirements and conforms to the Video Electronics Standards Association (VESA) Power Management Protocol: Suspend mode: <20 watts, < 3 second wait time; Off mode: <8 watts, < 10 second wait time . Meets Microsoft OnNow and Intel ACPI. |
| DDC capabilities | Supports DDC-1, DDC-2b, DDC-2ab according to Video Electronics Standards Association (VESA) Display Data Channel Standard Version 2.1 and Video Electronics Standards Association (VESA) Monitor Control Command Set Version 1p Rev 0 Draft 13. The EDID data contains a reference to the product code 2701 (0A8D hex) for this model with a Gateway identifier GWY. |
| Certifications | UL, CSA, DHHS, TUV, FCC Part 15 Class B, DOC class B, BZT, CPA, conforms to EPA standards, PC97 and PC98 Compliant, ICES 003, CE Mark EN 50081-1, EN55022: 1997 Class B, EN61000-3-2:1995, EN61000-3-3: 1995, EN 50082-1:1992, EN 61000-4-2:1995, ENV 50140:1994 Level2 (3V/M), EN 61000-4-4: 1995, VCCI Class 2 ITE, AS/NZS 3548:1992, FDA CFR 21, TCO '95, CE Mark EN 60950, CB Scheme IEC 950, AS/NZS 3260:1993 |
| Television mode and monitor mode | An Additional DDC command that invokes high-gain and data modes. High-gain mode enhances brightness, contrast, width, height, and color temperature (6500 Kelvin). Data mode is used for data work using a color temperature of 9300 Kelvin and lower brightness and contrast levels for better focus. |
| Audio |
| Channels | 2 matched audio channels |
| Wattage | 5 watts per channel |
| Frequency response | 50 Hz to 15 kHz at -3 decibels (dB) |
| Distortion | < 0.5% at 1 kHz at 3 watts |
| Input connectors | RCA-type color-coded for left (white) and right (red) |
| Input impedance | > 10 kilo ohms |
| Speakers | 4.75 × 2 inches high fidelity speaker internally mounted on each side of the monitor |
| Gain adjustment | Audio volume controlled by an on-screen menu or by DDC2AB computer commands. |
| Mechanical |
| Dimensions | 739 × 572 × 495 mm ( W × H × D) Appr. 29.1 × 22.5 × 19.5 inches (W × H × D) |
| Weight | 36.8 kilograms (kg) (81 pounds) |