Perform the following steps to install a 24-inch speaker bar on this display.

1. Turn off the display.

2. Tilt the display back, and then align the tabs on the top of the speaker bar with the slots on the lower, rear edge of the display.
   View Picture

3. Slide the speaker bar onto the bottom of the display until the speaker bar clips snap into place. Gently pull downward on the speaker bar to ensure that it is secure.
   View Picture

4. Plug the speaker bar's power cable into the display's speaker bar power connector.
   View Picture

5. Plug the speaker bar's speaker bar audio cable into the display's speaker bar audio connector.
   View Picture

6. Plug the speaker bar's pink microphone connector and the green headphone connector into the corresponding jacks on a computer.
   View Picture

7. If a composite video device is connected to the display's yellow composite video RCA jack, plug the device's left (white) and right (red) channel audio cables into the corresponding RCA jacks on the speaker bar.