Your monitor has a built-in four port USB 2.0 hub that conveniently connects USB devices. Because your computer case may be under your desk or inside a cabinet, these monitor-mounted USB ports can be much easier to access.

To use your monitor's USB ports you must first connect the monitor to a USB port on your computer. Because the USB hub uses power from the monitor, it does not require its own power connection.

Use the following steps to connect the USB cables:

1. Connect the included USB cable to the USB In ("B" type) port on the back of the monitor, and then connect the other end of the cable to a USB 2.0 port on your computer.
   View Picture

2. Connect any USB device to one of the available USB ports on the monitor (two on the back; two on the left side).
   View Picture