| FPD1530 LG 15-inch Black Monitor |
| Panel |
LG Philips 15", #LM150X08-A4K3, TFT PSWG mounting |
| Brightness |
200 candelas per square meter min
250 candelas per square meter typical |
| Contrast Ratio |
400:1 typical, 300:1 min |
| Resolution Range |
640 × 480 to 1024 × 768 (native) |
| Response Times |
Rise: 5 mSec rise typical, 10 mSec max
Fall: 11 mSec fall typical, 22 mSec max |
| Viewing Angles |
Vertical: 100 degrees typical, 90 degrees min
Horizontal: 130 degrees typical, 110 degrees min |
| Number of Colors |
16.2 million (6-bit color panel + Frame Rate Controller) |
| Color Coordinates of White |
x = .313, y = .329 |
| Default Color Temperature |
6500 degrees Kelvin |
| Active Display Area (H × V) |
304.128 mm × 228.096 mm |
| Pixel Pitch |
0.297 mm x 0.297 mm |
| Native Pixel Format |
1024 H x 768 V, RGB vertical stripe |
| Synchronization Range |
fH = 31-63 kHz, fV = 56-75 Hz |
| Pixel Clock |
25.175 MHz to 78.75 MHz |
| Display Mode |
Transmissive, normally white, TN |
| Viewing Angle Technology |
Optical compensation film |
| Backlights |
2 CCFL (top/bottom) |
| Panel Surface Treatment |
Anti-glare (13% haze treatment to front polarizer), hard coating (3H) |
| Interface / Scaler |
LVDS 1 channel, MST9011 (MStar) |
| Input Connector |
15-pin mini d-sub analog VGA |
| Controls |
Power On/Off, OSD control buttons (up, down, left and right), Auto-Setup |
| Tilt |
30 degrees up, 5 degrees down |
| Dot Defect Specification |
1 on, 3 off, 3 total |
| EDID Identifier |
1535 (05FF in hexadecimal) |
| VESA Mounting Interface Size |
75 mm × 75 mm |
| Input Voltage Range |
90 - 264 VAC, 50/60 Hz |
| Power Saving |
2 watt in Off state (@ 115 VAC) |
| Power Consumption |
35 Watts maximum |
| Regulations |
UL, CSA, FCC, NOM |
| Dimensions (W × H × D) |
364.2 mm × 367 mm × 205 mm |
| Mean Time Before Failure |
40 K hours lamps, 50 K hours chassis/panel |
| Weight |
Packaged:5.8 kg (12.78 lbs)
Unpackaged: 4.7 kg (10.35 lbs) |