Specifications
Part Number: 7005139Gateway FPD1940 Analog/Digital LCD Monitor with 19-inch Viewable Area R0

Following are the specifications for the Gateway® FPD1940 analog/digital LCD monitor with 19-inch viewable area.
Specifications are subject to change without notice or obligation.

Feature Specification
Brightness 200 candelas per square meter (minimum)
250 candelas per square meter (typical)
Contrast Ratio 500:1 (typical)
Resolution Range 640 × 480 to 1280 × 1024
Response Times 12 mSec rise
13 mSec fall (typical)
Viewing Angles Vertical: 176 degrees
Horizontal: 176 degrees
Number of Colors 16.7 million (8-bit)
Color Coordinates of White x = 0.313 y = 0.329
Viewable Display Area (H × V) 376.32 × 301.056 mm (14.8 × 11.9 inches)
Pixel Pitch 0.294 mm × 0.294 mm
Native Pixel Format (H × V) 1280 × 1024, RGB vertical stripe
Synchronization Range fH = 30-83 kHz, fV = 56-75Hz
Display Mode Normally black
Viewing Angle Technology MVA
Backlights Four - CCFL
Panel Surface Treatment Anti-glare, hard coating (3H)
Interface / Scaler MST 9151
Input Connectors 15-pin mini d-sub analog VGA
24-pin DVI-D
Controls Power On/Off, OSD control buttons (up, down, left and right), Auto/Set, LightView
EDID Identifier 1940 VGA ident (0794 in hexadecimal)
1941 DVI ident (0795 in hexadecimal)
Tilt 30 degrees up
5 degrees down
Dot (SubPixel) Defect Specification 4 On, 6 Off, 6 Total
EDID Identifier(s) mon0794 (VGA)
mon0795 (DVI)
VESA Mounting Interface Size 100 mm × 100 mm
Input Voltage Range 90-264 VAC, 50/60 Hz
Power Saving 3 watts Off state
Power Consumption 43 watts max.
Dimensions (W × H × D) 412.8 × 432.8 × 221.2 mm (16.25 × 17 × 8.7 inches)
Weight-packaged / unpackaged Packaged: 10 kg (22 lbs.)
Unpackaged: 7.4 kg (16.3 lbs.)
MTBF - 40 K hours lamps, 50 K hours chassis/panel
Regulations UL, CSA, FCC