Specifications
Part number 7004951

FPD 1540 LCD Monitor Specifications
Panel NEC 15-inch, #NL10276BC30-10, TFT
Brightness 200 candelas per square meter (min)
250 cdm2 (typical)
Contrast Ratio 450:1 (typical)
Resolution Range 640 x 480 to 1024 x 768
Response Times 8 + 17 mSec (Rise + Fall – typical)
Viewing Angle Vertical = 100 degrees
Horizontal = 120 degrees (typical)
Number of Colors 16.7 million (6-bit + Frame Rate Controller)
Color Coordinates of White x= .313, y= .329 (± .030)
Viewable Display Area 304.1 mm W x 228.1 H – 15-inch (38 cm) diagonal
Pixel Pitch 0.297 mm x 0.297 mm
Native Pixel Format 1024 H x 768 V, RGB vertical stripe
Synchronization Range fH= 31.5-60.0 kHz, fV= 56.2-75.1 Hz
Pixel Clock 21.1 MHz to 78.8 MHz
Display Mode Transmissive, normally white
Viewing Angle Technology Optical Compensation Film
Backlights 2 CCFL (top/bottom)
Panel Surface Treatment Anti-glare
Interface / Scaler Genesis ZAN1
Input Connector (dual) 15-pin mini d-sub analog VGA
Controls On/Off, OSD control buttons, Auto-Setup
Tilt 30 degrees up, 5 degrees down
Dot (subpixel) Defect Specification 4 on, 4 off, 4 total
EDID Identifier 1540 (0604 in hexadecimal)
Display Data Channel 2b
VESA Mounting Interface Size 75mm x 75mm
Input Voltage / Current 100VAC (0.4 A) - 240VAC (0.2A), 50/60 Hz
Power Saving EPA - 2 Watts Off state
Power Consumption 30 Watts max, 20 Watts typical
Backlights 2 CCFL
Regulations UL, cUL, FCC-B, NOM
Dimensions 344.8 mm W x 166 mm D x 344.2 mm H
MTBF 50K lamps (2), 70 K chassis/panel
Weight-packaged / unpackaged 5.5kg (12.1 lbs / 3.7kg (8.2 lbs)
w/stand = 3.7kg (8.2 lbs)
w/o stand = 2.8kg (6.2 lbs)