Specifications
      Show Part Numbers

FPD1520 - 15-inch Analog Input LCD Monitor with 15-inch Viewable Area Specifications
Panel #HT15X13-200A, TFT
Brightness 200 candelas per square meter (min)
250 candelas per square meter (typ)
Contrast Ratio 300:1 (typ)
Resolution Range 640x480 to 1024x768
Response Times 20mSec (Rise + Fall - typical)
Viewing Angle Vert = 95 degrees, Horiz = 130 degrees (typ)
Number of Colors 16.2 million (6-bit + dithering)
Color Coordinates of White x=.318, y=.330 (± .030)
Viewable Display Area 304.128mm (H) x 228.096 (V)
Pixel Pitch 0.297mm x 0.297mm
Native Pixel Format 1024 H x 768 V, RGB vertical stripe
Synchronization Range fH= 31-61kHz, fV= 56-75Hz
Display Mode Transmissive, normally white, TN
Viewing Angle Technology Optical Compensation Film
Backlights 4 CCFL (top/bottom)
Panel Surface Treatment Anti-glare, Hard Coating (3H)
Interface / Scaler LVDS 1ch, gmZAN1 (Genesis)
Input Connector 15-pin mini d-sub analog VGA
Controls Power On/Off, OSD control buttons (up, down, left and right), Auto-Setup
Tilt 30 degrees up
5 degrees down
Power Saving 5 W Off state
Power Consumption 35 Watts max.
Dimensions 389 mm W x 205 mm D x 392 mm H
MTBF 40 K lamps (2), 50 K chassis/panel
Weight-packaged / unpackaged 7.0 kg / 4.9 kg (15.4 lbs / 10.8 lbs)