Control Panel/OSD
Part Number: 7002139Gateway VX1120 22-inch Flat-CRT Monitor

Control panel

This is a view of the control panel on the front of the monitor. to The control panel displays the on-screen display (OSD). Press any of the buttons B-E to open the OSD.

The following table describes the functions of the control panel buttons.

Item Description Function
A Input signal select/OSD off button
  • With no OSD screen open, press to select either input signal A or B. If only one input is used, the monitor selects it automatically.
  • With OSD screen open, press to turn the OSD screen off.
    		•
    B Down button Press to select a group icon.
    C Item select button Press to select an item icon.
    D and E Function adjust buttons Press the adjust buttons to adjust the image on the screen.

    To adjust the screen using the OSD function, perform the following procedure.

    1. Turn on the monitor.

    2. Press any of the B through E buttons to display the OSD screen.

      Display settings

    3. Select the group icon on the main menu on the left by pressing the B button.

    4. Select the item icon on the Sub Menu at the top by pressing the C button.

    5. When pressing both B and C buttons simultaneously, the moving direction of the item selection becomes reversed.

    6. Adjust by pressing the D or E button.

    7. If no buttons are pressed for about ten seconds, the OSD screen disappears.
    Note: The OSD can be turned off quickly by pressing the A button.