Specifications
Part Number: 7004678Gateway LN520 Receiver R0

The following table provides specifications for the Gateway® LN520 Receiver

Specifications are subject to change without notice or obligation.

Feature Specifications
Amplifier
Power output, stereo mode 6 ohms, THD 0.3%, 40 Hz~20 kHz | 2×100 W
Total harmonic distortion 6 ohms, 50 W, 1 kHz | 0.09%
Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 ohms, 100 W | 0.1%
Input sensitivity, 47 k-ohms Line (AUX) | 200 mV
Signal to noise ratio, IHF "A" weighted Line (TAPE) | 95 dB
Frequency response Line (AUX, TAPE), 20 Hz~44 kHz | ±3 dB
Output level TAPE OUT, 2.2 k-ohms | 180 mV
Bass/Treble control 100 Hz/10 kHz | ±10 dB
Surround mode, only channel driven Front power output, 6 ohms, 1 kHz, THD 0.3% | 100 W+100 W
Center power output, 6 ohms, 1 kHz, THD 0.3% | 100 W
Surround power output, 6 ohms, 1 kHz, THD 0.3% | 100 W+100 W
Surround back power output, 6 ohms, 1 kHz, THD 0.3% | 100 W
Digital Audio
Sampling frequency 32, 44.1, 48, 96 kHz
Digital input level Coaxial, 75 ohms | 0.5 Vp-p
Optical, 660 nm | -15 ~ -21 dBm
Video
Video format NTSC
Input sensitivity (=Output level), 75 ohms Video (Composite(normal)) | 1 Vp-p
S-Video (luminance signal) | 1 Vp-p
(chrominance signal) | 0.286 Vp-p
FM Tuner
Tuning frequency range 87.5~108 MHz
Usable sensitivity, THD 3%, S/N 30 dB 17.2 dBf
50 dB quieting sensitivity, mono/stereo 20.8/41.2 dBf
Signal to noise ratio, 1 mV, mono/stereo 72/65 dB
Total harmonic distortion, 1 kHz, mono/stereo 0.2/0.4%
Frequency response, 20 Hz~15 kHz ±1 dB
Stereo separation, 65 dBf, 1 kHz 45 dB
Capture ratio 4 dB
IF rejection ratio 120 dB
AM Tuner
Tuning frequency range 520~1710 kHz
Usable sensitivity 500 µV/m
Signal to noise ratio 40 dB
Selectivity 25 dB
General
Power supply 120 V~60 Hz
Power consumption 110 W
Dimensions (W x H x D) 17-1/8 × 2-7/8 × 10 inches (435 × 73.5 × 254 mm)
Weight (Net) 4.2 kg (9.3 lbs)