Part Number: 7004678Gateway LN520 Receiver R0
Pressing the Power button causes the receiver to enter standby mode. The lighting of the Standby indicator means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the memorized contents and operation readiness.
To switch the power off, push the Power switch again. Then the power is cut off and the Standby indicator goes off.
In the standby mode, turn the power on. Each time the Power button on the remote control is pressed, the receiver is turned on to enter the operating mode or off to enter the standby mode.
In the standby mode, if the Input Selector button is pressed, the receiver is turned on automatically and the desired input is selected.