Specifications
      Show Part Numbers

Following are the specifications for the 74 GB 10,000 RPM Serial ATA150 hard drive with 8 MB cache.
Specifications are subject to change without notice or obligation.

Feature Specification
Performance
Rotational Speed 10,000 RPM (nominal)
Buffer Size 8 MB
Average Latency 2.99 ms (nominal)
Contact Start/Stop Cycles 20,000 minimum
Seek Times
  • Read Seek Time 4.5 ms
  • Write Seek Time 5.9 ms (average)
  • Track-To-Track Seek Time 0.6 ms (average)
  • Full Stroke Seek 10.2 ms (average)
  • Transfer Rates
  • Buffer To Host (Serial ATA) 1.5 Gb/s (Max)
  • Buffer To Disk 72 MB/s (Sustained)
  • Physical
    Formatted Capacity 74,356 MB
    Capacity74 GB
    InterfaceSATA 150 MB/s
    User Sectors Per Drive145,226,112
    Physical Dimensions
  • Height 1.028 inches (26.1 mm) max
  • Length 5.787 inches (147 mm) max
  • Width 4.00 inches (± 0.010 inch) (101.6 mm)
  • Weight 1.60 pounds (0.73 kg)
    Environmental
    Shock
  • Operating Shock (Read) 65G, 2 ms
  • Non-operating Shock 250G, 2 ms
  • Acoustics
  • Idle Mode 32 dBA (average)
  • Seek Mode 0 36 dBA (average)
  • Temperature
  • Operating 41° F to 131° F (5° C to 55° C)
  • Non-operating -40° F to 149° F (-40° C to 65° C)
  • Humidity
  • Operating 5-95% RH non-condensing
  • Non-operating 5-95% RH non-condensing
  • Altitude
  • Operating -1,000 feet to 10,000 feet (-305M to 3,050M)
  • Non-operating -1,000 feet to 40,000 feet (-305M to 12,200M )
  • Vibration
  • Operating
    • Linear 10-300 Hz, 3.0G (0 to peak)
    • Random 10-300 Hz, 0.008 g² / Hz
  • Non-operating
    • Low Frequency 5-20 Hz, 0.195 inches (double amplitude)
    • High Frequency 10-300 Hz, 5.0G (0 to peak)
  • Electrical
    Requirements
  • 12 VDC
  • Read/Write 349 mA
  • Idle 338 mA
  • Standby 15.9 mA
  • Sleep 16 mA
  • 5 VDC
  • Read/Write 706 mA
  • Idle 770 mA
  • Standby 314 mA
  • Sleep 184 mA
  • Power Dissipation
  • Read/Write 8.40 Watts
  • Idle 7.90 Watts
  • Standby 1.76 Watts
  • Sleep 1.11 Watts