| Maxtor 160-GB 7200 RPM 80GPP SATA Hard Drive Specifications |
| Interface |
Serial ATA (SATA) |
| Formatted GB |
160 |
| Bytes Per Sector |
512 |
| Default Sectors Per Track |
63 |
| Default Read/Write Heads |
16 |
| Default Cylinders |
16,383 |
| Guaranteed Sectors |
320,173,056 |
| Recording Method |
RLL EEPR4 |
| Servo Type |
Embedded |
| Number of Servo Sectors |
192 |
| Data Zones Per Surface |
16 |
| Data Sectors Per Track (ID/OD) |
502/960 |
| Recording Density in (KBPI, ID/OD) |
ID=556
OD=474 |
Track Density in (KTPI)
(maximum) |
79,714 |
| Areal Density (Gbits/in maximum ID/OD) |
45.4/38.9 |
| Spindle Speed (RPM) |
7,200 |
| Height (maximum in mm) |
26.10 mm |
| Width (typical mm) |
101.6 mm |
| Length (maximum in mm) |
147 mm (5.787 inches) |
| Weight (maximum in grams) |
630 g |
| Track-to-Track Seek Time (ms typical) |
0.9 |
| Average Latency |
4.18 ms |
| Drive Ready Time |
8 seconds |
| Spin-up (peak) |
23.2 |
| Seek |
12.2 W |
| Read/Write |
8.3 W |
| Idle Mode |
11.2 W |
| Standby Mode |
1.1 W |
| Sleep Mode |
1.1 W |
| Temperature |
Operating: 5 to 55° C
Non-operating: -40 to 70° C |
| Thermal Gradient |
25° C per hour (maximum) |
| Relative Humidity (operating) |
5 to 95% (non-condensing) |
| Wet Bulb Temperature |
30° C (maximum) |
| Altitude |
Operating: -650 to 10,000 feet
Non-operating: -650 to 40,000 feet) |
| Shock |
Operating: 60 Gs
Non-operating: 300 Gs |
United States
(change country or region)