Video Adapter Attached
Part number 7004921

The video adapter attaches to the rear of the Gateway® 210 Front Projector and provides a variety of audio and video ports. The adapter is secured to the projector with two thumbscrews.

Refer to the table below for information about the ports on the rear of the video adapter.

The table lists the ports as they appear from left to right on the video adapter.

Port Description
VGA Port Connect the video cable from a computer to this port.
USB Port Connect the USB cable to this port so you can use the remote control as a mouse.
S-Video Port Connect an S-Video cable to this port.
Video Port Connect the video (yellow) connector from a composite video cable to this port.
Audio Right Port Connect the white audio connector from a composite video cable to this port.
Audio Left Port Connect the red audio connector from a composite video cable to this port.
Audio In Port Connect the audio cable to this jack.
Audio Out Port Connect additional speakers to this jack.
Note: Refer to the Using the Gateway 210 Projector Connecting components section for more information.