OSD for TV and Video Mode
      Show Part Numbers

The OSD is used to set or adjust a variety of TV settings including the sleep timer, sound, image source, V-Chip (Parental Guide) controls, and picture. It can also be used to view signal frequency information and activate picture-in-picture (PIP) mode.

The OSD is activated and navigated using either the TV's remote control or the TV's control panel buttons. When the MENU button is pressed, the on-screen display (OSD) opens.

Click the links below to view the OSD screens.

Refer to the following table for information on navigating and making adjustments in the OSD.

Action Using the Remote Control Using the TV Control Panel Buttons
Open the OSD Press the MENU button Press the MENU button.
Change to another menu With the OSD open, press the MENU button until the desired menu is displayed.
Pressing the MENU button repeatedly toggles through the Picture, Sound, Option, and Setup menus.		 With the OSD open, press the MENU button until the desired menu is displayed.
Pressing the MENU button repeatedly toggles through the Picture, Sound, Option, and Setup menus.
Scroll on a menu Press the up or down arrow buttons Press the CH Up or CH Down button to scroll through the menu items.
Select a menu option Press the ENTER button Press the ENTER button
Adjust an option setting Press the left or right arrow buttons Press the VOL + or - buttons to increase or decrease the option value.
Close the OSD In an active menu, press the MENU button In an active menu, press the MENU button
Or
Allow the OSD to sit idle. The OSD times out and closes automatically.