Frequently Asked Questions
      Show Part Numbers

Q: How do I schedule a recording?

A: Perform the following steps to set up your DVD recorder to record a TV program broadcast at a later time.

  1. Turn on the TV.

  2. Make sure that your DVD recorder is turned on.

  3. Make sure that you have set the DVD recorder date and time.

  4. Place a disc label side up into the disc tray. If you are using a new DVD+RW disc, your DVD recorder formats the disc.

  5. Press the Source button one or more times to select TV.

  6. Press the CH (channel) up or down button to select the channel you want to record.

  7. Press the Timer button to open the Timer Record menu.

  8. Press the arrow buttons to select TV, and then press the Enter button.

  9. Press the arrow buttons to select Mode, and then press the Enter button.

  10. Press the arrow buttons to select the mode you want. Select ONCE to record the program one time only, select WEEKLY to record the program once a week, or select DAILY to record the program every day.

  11. Press the arrow buttons to select MM/DD, and then press the Enter button.

  12. Press a number button to enter a digit, and then press the arrow buttons to go to the next digit. If you need to change a digit, press the arrow buttons to go back.

  13. After the recording date is set, to confirm the date, press the Enter button.

  14. Press the arrow buttons to select Start, and then press the Enter button.

  15. Press a number button to enter a digit, and then press the arrow buttons to go to the next digit. If you need to change a digit, press the arrow buttons to go back.

  16. After the start time is set, to confirm the time, press the Enter button.

  17. Press the arrow buttons to select End, and then press the Enter button.

  18. Press a number button to enter a digit, and then press the arrow buttons to go to the next digit. If you need to change a digit, press the arrow buttons to go back.

  19. After the end time is set, to confirm the time, press the Enter button.

  20. Press the arrow buttons button to select Source, and then press the Enter button.

  21. Press the arrow buttons to select TV, and then press the Enter button.

  22. Press the arrow buttons to select Quality, and then press the Enter button.

  23. Press the arrow buttons to select a quality setting, and then press the Enter button.

  24. Press the Power button to turn off your DVD recorder. Your DVD recorder turns on and records at the date and time you specified.