Specifications
      Show Part Numbers

Feature Description
Drive mounting orientation Horizontal or vertical
Drive size Industry-standard 5.25-inch half-height form factor
Interface IDE ATAPI
Disc


Supported disc formats
  • CD-Audio
  • CD-DA
  • CD Extra
  • CD-I
  • CD-ROM (Mode 1 and Mode 2)
  • CD-ROM XA
  • CD-R
  • CD-RW
  • CD Plus (Enhanced Music CD)
  • Multi-session Photo CD
  • Karaoke CD
  • Video CD
Supported media types CD-ROM, CD-R, and CD-RW
Disc diameter 12 cm and 8 cm (8 cm in horizontal mount only)
Performance
Sustained data transfer rate
  • 3,000 KBps inner diameter
  • 7,200 KBps outer diameter
Burst transfer rates

  • Ultra DMA
  • DMA mode 2
  • PIO mode 4
 

  • 33.3 MBps
  • 16.6 MBps
  • 16.6 MBps
Access time 80 ms (typical)
Rotational speed 9,800 rpm (typical)
Spindle/Tray

  • Spindle spinup time
  • Spindle spin-down time
  • Tray open time
  • Tray close time
  

  • 3.5 sec
  • 7.0 sec
  • 3.0 sec
  • 3.0 sec
Data buffer 128 KB
Error rate Mode-1 (ECC on) 10 -12 block/bit
Mode-2 (ECC off) 10 -9 block/bit
Sampling frequency 44.1 kHz
Noise ratio 60 db
Total harmonic distortion (THD) 0.01%
Environmental
Operating temperature 5 to 45° C
Operating humidity 15 to 80% non-condensing humidity
Regulations and Standards
Safety UL - UL1950
CSA - CSA 22.2 No 950
TUV - EN60 950
CB-Scheme - ICE60950
Nemko - EN6095
EMC FCC (USA) - Part 15 Class B, CISPR22
CE (European Countries) - EN55022, EN50024
C-TICK (Australia) - AS/NZS3548
BSMI (Taiwan) - CNS13438(C6357)
Laser safety DHHS (USA) - 21CFR Subchapter J