Frequently Asked Questions
      Show Part Numbers

      Show Model(s)

Q: How do I remove and replace the front bezel on the 6-bay micro BTX case?

A: Remove the front bezel

  1. Turn off the computer, and then disconnect the power cord.

  2. Remove the right side panel.

  3. At the front inside of the case, while gently pulling outward on the bottom right corner of the bezel, press the three bezel release tabs.
    View Picture

  4. After the right side of the bezel is loosened, swing the bezel away from the case and off.
    View Picture

    Note: Some resistance may be felt when swinging the bezel away from the case. This is normal because the tabs on the left side of the bezel fit snugly into the slots in the case. Gently wiggling the bezel can help to release these tabs.

    Front bezel removed

Replace the front bezel

  1. Align the tabs on the left side of the bezel with the slots on the front of the case.
    View Picture

  2. Swing the bezel into place, ensuring that the tabs on the right side of the bezel go through the slots on the front of the case.
    View Picture

  3. Replace the right side panel.

  4. Connect the power cord, and then turn on the computer.